SA-9999 12-Channel Fiber Optic Multiplexer

SA-9999 12-Channel Fiber Optic Multiplexer

[Features] [Installation Diagram] [Ordering Information] [Pin Connections] [Specifications]


SA-9999 12-Channel Multiplexer

The SA-9999 is a multiple data-format multiplexer, allowing 12 channels of data to be transmitted simultaneously over a pair of optical fibers. A complete system consist of two SA-9999’s interconnected by a fiber optic cable.

The SA-9999’s very low distortion characteristic allows limited drop-and-insert operation. Each channel of data may be RS422, RS232, or TTL, operating simplex or full duplex, asynchronously at data rates up to 57.6 kbaud. On any given data channel, the data formats at either end of the link may be different, thus providing automatic data format conversion. The unit operates over 62.5/125 Ám multimode fiber or 8.3/125 Ám single-mode fiber.

[Back to Top]


Features

A little bullet.. 12 Channels
A little bullet.. RS232, RS422, or TTL Configurable on any Channel
A little bullet.. Automatic Data Format Conversion
A little bullet.. RJ-45 Data Connectors
A little bullet.. Data Rates to 38 kbps
A little bullet.. Multimode or Single Mode
A little bullet.. Solid-State Fusing
A little bullet.. Operates at -20 degrees C to 70 degrees C

[Back to Top]


Installation Diagram

  SA-9999 Installation Diagram

[Back to Top]


Ordering Information

Fiber Type No. of
Fibers
Transceiver
Model No.

Wavelength (nm)

TX Output (dBm)

Optical Budget (dB)

1

2

850

1300

1550

Multimode 62.5/125 Ám

X
X

SA-9999-A
SA-9999-B

X

X

-16
-16

14
14

Single-Mode 8.3/125 Ám

X

SA-9999-C

X

-21

9

[Back to Top]


Pin Connections 

By Pin Number By RS232 Control Format
PIN FUNCTION PIN FUNCTION

1

TTL In

4

Ground

2

RS422 + Out or TTL Out

5

Data Out

3

RS422 – Out

6

Data In

4

Ground By RS422 Control Format

5

RS232 Out

2

Data + Out

6

RS232 In

3

Data – Out

7

RS422 + In

4

Ground

8

RS422 – In

7

Data + In

8

Data + Out
By TTL Control Format

1

Data In

2

Data Out

3

Ground

[Back to Top]


Specifications

 
ELECTRICAL MECHANICAL

Power Requirements:

10-30 VDC (1 A @ 12 VDC) or 10-22 VAC (30 VA)

Bar Board Size:


Rack Mounted Size:

13"W x 4.5" D x 1.75" H
(33 x 11.5 x 4.5 cm)

19" W x 10" D x 3.5" H
(48.3 x 25.4 x 8.9 cm).

MTBF:

> 100,000 hours
DATA

Bar Board Weight:
Rack Mounted Weight:

6 lbs (.27 kg)
4.9 lbs (2.2 kg)

No. of Channels:

12

Control Format:

RS232, RS422, or TTL

Max Data Rate:

57.6 kbps ENVIRONMENTAL

Bit Error Rate:

<10-9

Ambient Temperature Range:

-4░ F to 158░ F (-20░ C to +70░ C)

Pulse Width Distortion:

<8% @ 57.6 kbps

Humidity:

5 to 95% no condensing

Storage Temperature Range:

-40░ F to 185░ F (-40░ C to +85░ C)
CONNECTORS

Optical:

AT&T Type ST

Data:

RJ45

[Back to Top]


124 Robin Road, Suite 1600
Altamonte Springs, FL 32701
Phone: (407) 331-4724
Fax: (407) 331-0656

Copyright ©1984-2002 Smart Access, Inc. All Rights Reserved.
Created by AV Marketing, Inc. Maintained by WebmasterOffice.com




Button - Corporate Information



Button- Product Showroom

Button- Airport Systems

Button- Technical Support

Button - Mail Room

Button- Clients

Button- Refer this website to your associates
Contact